Apocalypse Atom 12.5K PRO Amplifier
Advantages of the Atom 12.5K Pro:
- Class D energy efficiency: Save money and space in your car with less extra power. High efficiency reduces heat and strain on the amplifier because minimal electrical energy escapes into heat.
- Compactness. With a rated power of 12500 watts, the device is only 60.9 cm long. It is much smaller than full-size counterparts with comparable specifications.
- Huge power. Without a good amplifier, even a top-of-the-line subwoofer will not reach its potential, and the bass will be weak. The Atom 12.5K PRO Apocalypse monoblock delivers 12500 watts into 1 ohm - this is enough even for two sports subs.
- Efficient cooling. The amplifier has not only a developed system of radiators on the body, but also two coolers for active hot air removal. Achieve maximum volume without restrictions and be sure that the equipment will not overheat even at the maximum load.
- Low cost. An amplifier based on Brazilian circuitry is noticeably cheaper than analogues.
Atom PRO is a fundamentally redesigned version of AAB/AAP amplifiers. Alphard Group engineers added a four-layer board to the device for wiring the signal part and power supply, and also changed the composition of the element base. After the upgrade, the amplifiers have much less interference, and now the equipment does not go into defense. In our video, there is a stress test of the Atom 12.5K PRO model.
The monoblock has a remote control with an operation indicator and a clip lamp that will tell you when you need to reduce the gain. The device with a flat surface is easily attached to double-sided tape or self-tapping screws. To make the amplifier work correctly and for a long time, install it according to the instructions and connect at least 1 Ohm, or entrust the installation to professionals.
Model | Atom 12.5K Pro |
Class | D |
Number of channels | 1 |
Frequency range | 10 - 250 Hz |
RMS Power @ 1 Ohm (14.4 V) | 12500 W |
RMS Power @ 1 Ohm (12 V) | 10200 W |
RMS Power @ 2 Ohms (14.4 V) | 6950 W |
RMS Power @ 4 Ohms (14.4 V) | 3870 W |
Minimum Channel Load Resistance | 1 Ohm |
Input Sensitivity | 0.2 - 6 V |
Low Pass Filter | 40 - 250 Hz |
High Pass Filter | 10 - 50 Hz |
Crossover | 12 dB/Oct |
Bass Adjustment | 35 - 90 Hz |
Entrance terminal | 0 Ga |
Exit terminal | 4 Ga |
Damping Factor | ≥ 198 |
Operating voltage | 9 - 15 V |
Signal/Noise | ≥ 85 dB |
Dimensions (LxWxH) | 220.0 x 609.0 x 66.0 mm |
Shipping Weight | 10.00 kg |
Equipment | Amplifier, remote regulator, installation kit, manual, warranty card |